ZyXEL Communications OLT2406 - CONSOLE Port Connections

Chapter 1 System Introduction
OLT2406 User’s Guide
38
1.4.3 CONSOLE Port Connections
Connect the male RJ-45 (8P4C) end of the RS-232 console cable to the console port of the
management switching card. Connect the female end to a serial port (COM1, COM2, or other COM
port) of your computer.
Figure 4 RJ-45-to-DB-9 Console Cable
The following table and figures show the pin assignments.
Figure 5 RJ-45 Pin Assignment
Figure 6 RS-232 Pin Assignment
Table 4 RJ-45-to-DB-9 Console Cable Pin Assignment
RJ-45 PIN NUMBER NAME DB-9 PIN NUMBER
1NC
2NC
3 UART_TX 2
4GND5
5GND6
6UART_RX3
7NC
8NC