ZyXEL Communications OLT2406 - Date and Time Commands

Chapter 54 Basic Settings
OLT2406 User’s Guide
414
54.4 Date and Time Commands
Use these commands to configure the date and time on the OLT.
Table 194 Time and Date Commands
COMMAND DESCRIPTION M P
show time
Displays current system time and date. E 3
time <hour:min:sec>
Sets the current time on the OLT.
hour: 0-23
min: 0-59
sec: 0-59
Note: If you configure Daylight Saving Time
after you configure the time, the OLT
will apply Daylight Saving Time.
C13
time date <month/day/year>
Sets the current date on the OLT.
month: 1-12
day: 1-31
year: 1970-2037
C13
time timezone <-1200|...|1200>
Selects the time difference between UTC
(formerly known as GMT) and your time zone.
C13
time daylight-saving-time
Enables daylight saving time. The current time is
updated if daylight saving time has started.
C13
time daylight-saving-time start-
date <week> <day> <month> <o’clock>
Sets the day and time when Daylight Saving
Time starts.
week: first, second, third, fourth, last.
day: Sunday, Monday, Tuesday, ....
month: January, February, March, ....
o’clock: 0-23
In most parts of the United States, Daylight
Saving Time starts on the second Sunday of
March at 2 A.M. local time. In the European
Union, Daylight Saving Time starts on the last
Sunday of March at 1 A.M. GMT or UTC, so the
o’clock field depends on your time zone.
C13
time daylight-saving-time end-date
<week> <day> <month> <o’clock>
Sets the day and time when Daylight Saving
Time ends.
In most parts of the United States, Daylight
Saving Time ends on the first Sunday of
November at 2 A.M. local time. In the European
Union, Daylight Saving Time ends on the last
Sunday of October at 1 A.M. GMT or UTC, so the
o’clock field depends on your time zone.
C13
no time daylight-saving-time
Disables daylight saving on the OLT. C 13
time daylight-saving-time help
Provides more information about the specified
command.
C13