ZyXEL Communications OLT2406 - Ipv6 Commands

Chapter 55 IPv6
OLT2406 User’s Guide
431
Figure 249 MLD Snooping-Proxy Example
55.2 IPv6 Commands
The following section lists the commands for this feature.
1
2
3
4
5
6
7
8
9
X
Done
Query
Report
DSL
Table 211 ipv6 address Commands
COMMAND DESCRIPTION M P
vlan <1-4094>
Enters config-vlan mode for the specified VLAN.
Creates the VLAN, if necessary.
C13
ipv6
Globally enables IPv6 in this VLAN. The OLT then
creates a link-local address automatically. Use
“show ipv6” to see the generated address.
C13
ipv6 address <ipv6-address>/
<prefix>
Manually configures a static IPv6 global address
for the VLAN.
C13
ipv6 address <ipv6-address>/
<prefix> eui-64
Manually configures a static IPv6 global address
for the VLAN and have the interface ID be
generated automatically using the EUI-64
format.
C13
ipv6 address <ipv6-address>/
<prefix> link-local
Manually configures a static IPv6 link-local
address for the VLAN.
C13
ipv6 address autoconfig
Use the command to have the OLT generate an
IPv6 global address automatically in this VLAN
after the OLT obtains the VLAN network
information from a router.
Note: Make sure an IPv6 router is available
in the VLAN network before using this
command on the OLT.
C13