Chapter 55 IPv6
OLT2406 User’s Guide
432
ipv6 address default-gateway
<gateway-ipv6-address>
Sets the default gateway for the VLAN. When an
interface cannot find a routing information for a
frame’s destination, it forwards the packet to
the default gateway.
C13
no ipv6
Disables IPv6 in this VLAN. C 13
no ipv6 address <ipv6-
address>/<prefix>
Removes a specified static global address. C 13
no ipv6 address <ipv6-
address>/<prefix> eui-64
Removes a specified static global address
whose interface ID was generated using the
EUI-64 format.
C13
no ipv6 address autoconfig
Disables IPv6 address autoconfiguration in this
VLAN.
C13
no ipv6 address default-
gateway
Removes the default gateway address for this
VLAN.
C13
no ipv6 address dhcp client
Disables the DHCP client feature in this VLAN. C 13
no ipv6 address dhcp client
option
Sets the OLT to not obtain the DNS server
information from the DHCP server.
C13
show ipv6
Displays IPv6 settings in all VLANs on the OLT. E 0
default-management <in-band|out-
of-band>
Sets through which traffic flow (in-band or out-
of-band) the OLT sends packets originating from
itself (such as SNMP traps) or packets with
unknown source.
in-band: IP interfaces that can be accessed
through GE-1 ~ GE-6 uplink port or OLT PON, GE
ports in GE line card. These are the ports for
regular customer services.
out-of-band: IP interfaces that can be
accessed through the management port. The
port is not used for regular customer service.
C13
restart ipv6 dhcp client vlan <1-
4094>
Sets the OLT to send a release message for the
assigned IPv6 address to the DHCP server and
start the DHCP message exchange again.
E13
Table 211 ipv6 address Commands (continued)
COMMAND DESCRIPTION M P
To Next Page
Loading...
