OLT2406 User’s Guide
455
CHAPTER 57
Static MAC Forwarding
57.1 Overview
Use this chapter to configure static MAC address forwarding rules, which are based on MAC addresses
of devices on your network.
57.2 Static MAC Forwarding Overview
A static MAC address is an address that has been manually entered in the MAC address table. Static
MAC addresses do not age out. When you set up static MAC address rules, you are setting static MAC
addresses for a port. This may reduce the need for broadcasting.
Static MAC address forwarding together with port security allows only computers in the MAC address
table on a port to access the OLT. See Chapter 70 on page 504 for more information on port security.
57.3 Static MAC Forwarding Commands
Use these commands to configure static MAC address forwarding.
Note: Use the mac commands to look at the current mac-forward settings. See Chapter 88 on
page 634.
Table 226 Static MAC Forwarding Commands
COMMAND DESCRIPTION M P
mac-forward name <name> mac <mac-
addr> vlan <vlan-id> interface
<ge|msc|pon>-<slot>-<port>
Configures a static MAC address forwarding
rule. The name can be 1-32 alphanumeric
characters.
C13
no mac-forward mac <mac-addr> vlan
<vlan-id> interface <ge|msc|pon>-
<slot>-<port>
Removes the specified MAC forwarding entry,
belonging to a VLAN group forwarded through
an interface.
C13
mac-forward name <name> mac <mac-
addr> vlan <vlan-id> interface
<ge|msc|pon>-<slot>-<port>
inactive
Disables a static MAC address forwarding rule. C 13
no mac-forward mac <mac-addr> vlan
<vlan-id> interface <ge|msc|pon>-
<slot>-<port> inactive
Enables the specified MAC address, belonging
to a VLAN group forwarded through an
interface.
C13
To Next Page
Loading...
