ZyXEL Communications OLT2406 - The ONT WAN Screen

Chapter 39 ONT Quick Setup
OLT2406 User’s Guide
324
The following table describes the labels in this screen.
39.7 The ONT WAN Screen
Use this screen to display the WAN information of the ONTs. Click Wan in the Advanced Application >
ONT Quick Setup screen to display the screen as shown.
Figure 198 Advanced Application > ONT Quick Setup > Wan
The following table describes the labels in this screen.
Table 146 Advanced Application > ONT Quick Setup > Unreg
LABEL DESCRIPTION
Choose the GPON interface to show the unregistered ONTs connected to it from the drop-down
list.
Index This is the index number of an unregistered ONT.
ONT ID This is the identifier of an ONT.
SN This displays the GPON serial number of the unregistered ONT.
Password This displays the GPON password of the unregistered ONT.
Status This displays the registration status of the ONT.
Template This displays the template that the unregistered ONT uses.
Register Select this to register the ONT.
Apply Click Apply to save the changes.
Cancel Click Cancel to begin configuring the screen again.
Paging
Prev/Next Click Prev or Next to show the previous/next screen if all status information cannot be seen in one
screen.
Table 147 Advanced Application > ONT Quick Setup > Wan
LABEL DESCRIPTION
This is the identifier for the GPON interface.
ONT AID This field displays the ONT’s ID in the format: ont-<pon>-<ont>.
Wan ID This field displays the WAN interface ID of the ONT.
Status This field displays whether the WAN interface is active or not.
Type This field displays the WAN encapsulation method.
Link Status This field displays whether the WAN connection is up or down.
Nat This field displays whether NAT is enabled or not on the ONT.
Service Type This field displays the current encapsulation method.
Vlan This field displays the VLAN group that the ONT belongs to.
Priority This field displays the priority level of the VLAN group.