Chapter 38 ONT Template
OLT2406 User’s Guide
314
Figure 190 Advanced Application > ONT Template > ONT ACL
The following table describes the labels in this screen.
38.2.6.1 ACL Profile Setting
Use this screen to create an ACL profile for an ONT.
Click the hyper link ACL Profile Setting in the Advanced Application > ONT Template > ONT ACL screen to
display the screen as shown.
Table 137 Advanced Application > ONT Template > ONT ACL
LABEL DESCRIPTION
Select a connected ONT that you want the settings configured here to apply to from the first
drop-down list.
Select an ONT template that you want the ACL profile to apply to from the second drop-down
list.
ID Enter a number in the range of 1 to 16. This number will be used as the identification number for
the ACL profile selected in the ACL Profile field.
ACL Profile Select an ACL profile that you want to assign an identification number to.
Click the hyper link ACL Profile Setting to create an ACL profile.
Add Click Add to add an ONT ACL entry, and apply the ACL profile to the ONT.
Cancel Click Cancel to clear the fields.
Clear Click Clear to return the screen’s settings to the defaults.
Index This is the index number of an ONT ACL entry. * means all entries.
AID This displays the ONT’s ID.
ID This displays the identification number of the ACL profile applied to the ONT.
ACL Profile This displays the name of the ACL profile applied to the ONT.
Delete Select this for one or more entries and click Delete to remove them.
* Select this to select all of the entries for deletion.
Delete Click Delete to remove the entries with the Delete option selected.
Cancel Click Cancel to begin configuring the screen again.
To Next Page
Loading...
