ZyXEL Communications OLT2406 - Page 566

Chapter 78 VoIP
OLT2406 User’s Guide
566
call-prog-trans <features>
Configures the list of supported features for calls
that are in progress. You can select multiple
options separated by commas without spaces;
for example: cal-tra,cal-hol.
3way: 3-way calling
cal-tra: Call transfer
cal-hol: Call hold
cal-par: Call park
not-dis: Do not disturb
flash: Flash on emergency service call
origin: Emergency service origination hold
6way: 6-way calling
C13
call-wait <features>
Configures the list of supported call waiting
features. You can select multiple options
separated by commas without spaces; for
example: cal-wai,cid-ann.
cal-wai: Call waiting
cid-ann: Caller ID announcement
C13
cid <features>
Configures the list of supported caller ID (CID)
features. You can select multiple options
separated by commas without spaces; for
example: cal-nam,cid-num.
cal-num: Calling number
cal-nam: Calling name
cid-blo: CID blocking (both number and
name)
cid-num: CID number
cid-nam: CID name
ACR: Anonymous CID blocking
C13
conf-factory-uri <1~63
characters>
Configures the conference factory URI (from 1
to 63 characters). A conference factory
generates a unique conference ID, to identify
and address a conference focus, using a call
signaling interface.
C13
direct-con <features>
Configures the list of direct connect features.
You can select multiple options separated by
commas without spaces; for example:
enable,dia-opt.
enable: Direct connect feature enabled
dia-opt: Dial tone feature delay option
C13
direct-con-uri <1~63
characters>
Configures a direct connect URI (from 1 to 63
characters). Set a direct connect URI to use SIP
to direct connect a VoIP Server.
C13
host-part-uri <1~63
characters>
Configures the host or domain part of the SIP URI
(from 1 to 63 characters).
C13
Table 295 VoIP SIP Profile Commands (continued)
COMMAND DESCRIPTION M P