Chapter 31 ONT VoIP
OLT2406 User’s Guide
277
re-
registration
head start
time
Enter the number of seconds (0-720) the OLT tries again to register the SIP account before the
session ends.
host part uri Configure the host or domain part of the SIP URI (from 1 to 63 characters).
sip registrar Configure the IP address or URI (from 1 to 63 characters) of the SIP registrar server.
softswitch Configure the SIP gateway softswitch vendor name code (4 characters).
caller id Configure the list of supported caller ID (CID) features.
cal-num: Calling number
cal-nam: Calling name
cid-blo: CID blocking (both number and name)
cid-num: CID number
cid-nam: CID name
ACR: Anonymous CID blocking
call waiting Configure the list of supported call waiting features.
cal-wai: Call waiting
cid-ann: Caller ID announcement
call progress
or transfer
Configure the list of supported features for calls in progress.
3way: 3-way calling
cal-tra: Call transfer
cal-hol: Call hold
cal-par: Call park
not-dis: Do not disturb
flash: Flash on emergency service call
origin: Emergency service origination hold
6way: 6-way calling
call
presentation
Configure the list of supported call presentation features.
spl-rin: Message waiting indication splash ring
dia-ton: Message waiting indication special dial tone
vis-ind: Message waiting indication visual indication
cal-for: Call forwarding indication
direction
connect
Configure the list of direct connect features.
enable: Direct connect feature enabled
dia-opt: Dial tone feature delay option
direction
connect uri
Configure a direct connect URI (from 1 to 63 characters). Set a direct connect URI to use SIP to
direct connect a VoIP Server.
bridged line
agent uri
Set the bridged line agent URI (from 1 to 63 characters). An interaction SIP bridge enables agents to
use an IP telephone at a remote location through a TCP/IP network to a Customer Interaction
Center.
Table 114 Advanced Application > ONT VoIP > Voip-Sip-Profile (continued)
LABEL DESCRIPTION
To Next Page
Loading...
