ZyXEL Communications OLT2406 - Page 307

Chapter 38 ONT Template
OLT2406 User’s Guide
307
The following table describes the labels in this screen.
Table 133 Advanced Application > ONT Template > Uniport Queue
LABEL DESCRIPTION
Choose the GPON interface that you want the settings configured here to apply to from the first
drop-down list.
Choose the template that you want the settings configured here to apply to from the second
drop-down list.
Active Select this to have the settings configured here take effect.
Uniport AID Select a UNI port on the ONT. The UNI ports are represented by the format: uniport-<pon>-<ont>-
<card>-<port>.
TC Select the QoS traffic class (0~7) of traffic to which this queue is applied.
Priority Select the priority level of traffic (0~7) to which this queue is applied.
At the time of writing, this field is not workable.
Weight Specify the weight of traffic to which to this queue is applied.
At the time of writing, this field is not workable.
US BW Profile Select the bandwidth profile to apply to the UNI port’s upstream traffic.
Click BW Profile Setting to display the settings of the bandwidth profiles.
DS BW Profile Select the bandwidth profile to apply to the UNI port’s downstream traffic.
Click BW Profile Setting to display the settings of the bandwidth profiles.
DS Option Select whether to apply the downstream rate limit function to the OLT (olt) or the ONT (ont).
BW Share
Groupid
Select the IDs of the (already configured) bandwidth group on this ONT to put the upstream and
downstream QoS queues into. You created the bandwidth group when you configured the ONT
setup. The UNI port will share the bandwidth defined by the bandwidth group.
DS BW Share
Groupid
Specify the ID (1-40) of the downstream bandwidth group on this ONT to put the QoS queues into.
You created the bandwidth group when you configured the ONT setup. The UNI port will share
the downstream bandwidth defined by the bandwidth group. The OLT uses the value in the BW
Share Groupid filed as the default value.
Add Click Add to add a uniport queue entry.
Cancel Click Cancel to clear the fields.
Clear Click Clear to return the screen’s settings to the defaults.
Index This is the index number of a UNI port queue.
AID This is the UNI port’s ID in the format: uniport-<pon>-<ont>-<card>-<port>.
Active This shows whether the uniport queue is enabled or disabled.
TC This is the QoS traffic class (0~7) of traffic to which to apply this queue.
Priority This is the priority level of traffic (0~7) to which to apply this queue.
Weight This is the weight of traffic to which to apply this queue.
US BW Profile This displays the bandwidth profile the UNI port queue applies to the UNI port’s upstream traffic.
DS BW Profile This displays the bandwidth profile the UNI port queue applies to the UNI port’s downstream
traffic.
DS Option This shows whether the UNI port queue applies the downstream rate limit function to the OLT (olt)
or the ONT (ont).
US/DW Bw
Share Groupid
This displays the IDs of the (already configured) bandwidth group on this ONT to put the upstream
and downstream QoS queues into.
Delete Select this for one or more entries and click Delete to remove them.
* Use this row to select all of the entries for deletion.