Chapter 15 Bandwidth Control
OLT2406 User’s Guide
148
Egress Rate Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the out-going traffic
flow on a port.
Apply Click Apply to save your changes to the OLT’s run-time memory. The OLT loses these changes if it is
turned off or loses power, so use the Save link on the top navigation panel to save your changes to
the non-volatile memory when you are done configuring.
Cancel Click Cancel to reset the fields.
Table 44 Advanced Application > Bandwidth Control (continued)
LABEL DESCRIPTION
To Next Page
Loading...
