Chapter 17 Mirroring
OLT2406 User’s Guide
153
Figure 96 Advanced Application > Mirroring
The following table describes the labels in this screen.
Table 47 Advanced Application > Mirroring
LABEL DESCRIPTION
Active Select this check box to activate port mirroring on the OLT. Clear this check box to disable the
feature.
Monitor
Port
The monitor port is the port you copy the traffic to in order to examine it in more detail without
interfering with the traffic flow on the original port(s). Enter the port number of the monitor port.
Port This field displays the port number. * means all ports.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set the
common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Mirrored Select this option to mirror the traffic on a port.
Direction Specify the direction of the traffic to mirror by selecting from the drop-down list box. Choices are
Egress (outgoing), Ingress (incoming) and Both.
To Next Page
Loading...
