Chapter 19 Port Authentication
OLT2406 User’s Guide
165
Figure 105 Advanced Application > Port Authentication > 802.1x
The following table describes the labels in this screen.
Table 53 Advanced Application > Port Authentication > 802.1x
LABEL DESCRIPTION
Active Select this check box to permit 802.1x authentication on the OLT.
Note: You must first enable 802.1x authentication on the OLT before configuring it
on each port.
Port This field displays the port number.
See Table 29 on page 120 for more detailed information.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to
set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active Select this checkbox to permit 802.1x authentication on this port. You must first allow 802.1x
authentication on the OLT before configuring it on each port.
To Next Page
Loading...
