Chapter 19 Port Authentication
OLT2406 User’s Guide
167
Use this screen to enable and assign a guest VLAN to a port. In the Port Authentication > 802.1x screen
click Guest Vlan to display the configuration screen as shown.
Figure 107 Advanced Application > Port Authentication > 802.1x > Guest VLAN
The following table describes the labels in this screen.
Table 54 Advanced Application > Port Authentication > 802.1x > Guest VLAN
LABEL DESCRIPTION
Port This field displays the port number.
See Table 29 on page 120 for more detailed information.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active Select this checkbox to enable the guest VLAN feature on this port.
Clients that fail authentication are placed in the guest VLAN and can receive limited services.
Guest Vlan A guest VLAN is a pre-configured VLAN on the OLT that allows non-authenticated users to
access limited network resources through the OLT. You must also enable IEEE 802.1x
authentication on the OLT and the associated ports. Enter the number that identifies the guest
VLAN.
Make sure this is a VLAN recognized in your network.
To Next Page
Loading...
