Chapter 25 Multicast
OLT2406 User’s Guide
213
Add Click this to create a new entry.
This saves your changes to the OLT’s run-time memory. The OLT loses these changes if it is turned
off or loses power, so use the Save link on the top navigation panel to save your changes to the
non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
MVLAN This field displays the multicast VLAN ID.
Name This field displays the descriptive name for this setting.
Start Address This field displays the starting IP address of the multicast group.
End Address This field displays the ending IP address of the multicast group.
Delete All To delete the profile(s) and all the accompanying rules, select the profile(s) that you want to
remove, then click the Delete button. You can select the check box in the table heading row to
select all profiles.
Delete Group To delete a rule(s) from a profile, select the rule(s) that you want to remove, then click the Delete
button.
Delete Select the entry(ies) that you want to remove, then click the Delete button to remove the
selected entry(ies) from the table.
If you delete a multicast VLAN, all multicast groups in this VLAN will also be removed.
Cancel Select Cancel to clear the checkbox(es) in the table.
Table 74 Advanced Application > Multicast > Multicast Setting > MVR > Group Configuration
LABEL DESCRIPTION
To Next Page
Loading...
