Chapter 29 PPPoE
OLT2406 User’s Guide
260
Here’s the priority that Circuit and Remote ID information will be used in this screen if the listed screens all
have settings for Circuit and Remote ID information.
1 Advanced Application > PPPoE > Intermediate Agent > Option 82
2 Advanced Application > PPPoE > Intermediate Agent > Port > VLAN
3 Advanced Application > PPPoE > Intermediate Agent > Port
Click the ONT Option link in the Intermediate Agent > Port screen to display the screen as shown.
Figure 157 Advanced Application > PPPoE > Intermediate Agent > Port > ONT Option
The following table describes the labels in this screen.
Enabled Enabled Disabled • The OLT adds PPPoE options in the outgoing
packets.
• The OLT drops the incoming packets with
PPPoE options from an ONT
Enabled Disabled Disabled • The OLT won’t add PPPoE options in the
outgoing packets.
• The OLT drops the incoming packets with
PPPoE options from an ONT
Enabled Enabled Enabled • The OLT adds PPPoE options in the outgoing
packets.
• The OLT forwards the incoming packets with
PPPoE options from an ONT
Enabled Disabled Enabled • The OLT won’t add PPPoE options in the
outgoing packets.
• The OLT forwards the incoming packets with
PPPoE options from an ONT
Note: Enable or disable the PPPoE intermediate agent globally on the OLT in the Advanced
Application > PPPoE > Intermediate Agent screen.
Table 104 PPPoE Options
PPPOE GLOBAL PPPOE OPTION
PPPOE PASS
THROUGH
ACTION
Table 105 Advanced Application > PPPoE > Intermediate Agent > Port > ONT Option
LABEL DESCRIPTION
Choose the GPON interface that you want the settings configured here to apply to from the
drop-down list.
Index This is the index number of the ONT connected to the GPON interface.
To Next Page
Loading...
