Chapter 31 ONT VoIP
OLT2406 User’s Guide
280
content-
table
Configure a dialing token (rule) in the dial plan table.
Identify a dial plan table entry number (from 1 to 4) and dial plan rule (from 1 to 28 characters).
Use the symbols in parentheses to create dial plan rules:
• Multiple Rule (|): Use "|" to separate multiple rules.
• Numeric digit(x): Allow users to input any numeric digit (0~9). One 'x' means one digit.
• A subset of keys ([]): Allow users to input a range of digits, for example, [1-3] or [148].
• Repeat (.): Allow users to input a repeatable digit for more than one time, for example, (12.).
This means 1, 12, 122, and 1222 are allowed.
• Append (<:digits>): Append digits in the place of the rule, for example, <:123>. Digits “123” will be
added in the rule.
• Remove (<digits:>): Remove digits in the place of the rule, for example, <123:>. Digits “123” will be
removed from the rule.
• Replace (<digits:digits>): Replace the first set of digits (before the colon) with the second sets of
digits (after the colon). For example, use <123:456> to replace '123' digits with '456' digits in the
place of the rule.
• Block (!): Type '!' at the end of the rule to block the number which matches the rule.
• Wait Timeout to Dial (T): Type 'T' at the end of the rule. Once the dialed number is input, the call is
dialed out after the timeout.
• Gateway (=gw0=)(=gw3=): Type one of these at the end of the rule. When a dialed number
matches the rule, the OLT transfers the call to the gateway (0: FXS port; 3: SIP).
Apply Click Apply to save the changes.
Cancel Click Cancel to clear the fields.
Clear Click Clear to return the screen’s settings to the defaults.
Index This is the index number of an ONT VoIP dial plan profile.
Name This is the name of the profile.
Rule This displays the profile’s settings.
Delete Select this for one or more profiles and click Apply to remove them.
Select Select this to edit the profile in the fields above.
* Use this row to select all of the profiles for deletion.
Delete Click Delete to remove the profiles with the Delete option selected.
Cancel Click Cancel to begin configuring the screen again.
Table 115 Advanced Application > ONT VoIP > Voip-Dial-Plan
LABEL DESCRIPTION
To Next Page
Loading...
