Chapter 32 PON DDMI
OLT2406 User’s Guide
284
Transmit
Power
Threshold
Specify the lower and upper bounds in dBm for the transmission power threshold.
Temperature
Threshold
Specify the lower and upper bounds in degrees Celsius for the temperature threshold.
Power Feed
Voltage
Threshold
Specify the lower and upper bounds in volts for the power feed voltage threshold.
Add Click Add to create an ONT alarm profile.
Cancel Click Cancel to clear the fields.
Clear Click Clear to return the screen’s settings to the defaults.
Index This is the index number of an ONT alarm profile.
Name This is the name of the ONT alarm profile.
Bias Current
Lower/Upper
This displays the lower and upper bounds for the laser bias current.
Rx Power
Lower/Upper
This displays the lower and upper bounds for the received power.
Tx Power
Lower/Upper
This displays the lower and upper bounds for the transmitted power.
Temperature
Lower/Upper
This displays the lower and upper bounds for the temperature.
Feed
Voltage
Lower/Upper
This displays the lower and upper bounds for the power feed voltage threshold.
Delete Select this for one or more profiles and click Delete to remove them.
* Use this row to select all of the profiles for deletion.
Delete Click Delete to remove the profiles with the Delete option selected.
Cancel Click Cancel to begin configuring the screen again.
Table 118 Advanced Application > PON DDMI > ONT Alarm Profile
LABEL DESCRIPTION
To Next Page
Loading...
