EasyManua.ls Logo

ZyXEL Communications OLT2406 - Page 286

ZyXEL Communications OLT2406
766 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 32 PON DDMI
OLT2406 User’s Guide
286
Cancel Click Cancel to clear the fields.
Clear Click Clear to return the screen’s settings to the defaults.
Index This is the index number of a PON DDMI entry.
AID This displays the GPON interface of this entry.
UserDefineActive This displays whether the PON DDMI settings of this entry are enabled or not.
UserDefineDelete Select this for one or more profiles and click Delete to remove them.
Delete Click Delete to remove the profiles with the Delete option selected.
Cancel Click Cancel to begin configuring the screen again.
PON DDMI
High Alarm Thres. This displays the high value alarm threshold for each monitored DDMI parameter. The OLT
reports an alarm signal to the Optical Line Terminal (OLT) if the monitored DDMI parameter
reaches this value.
High Warn Thres. This displays the high value warning threshold for each monitored DDMI parameter. The OLT
reports an warning signal to the Optical Line Terminal (OLT) if the monitored DDMI parameter
reaches this value.
Low Warn Thres. This displays the low value warning threshold for each monitored DDMI parameter. The OLT
reports an warning signal to the Optical Line Terminal (OLT) if the monitored DDMI parameter
reaches this value.
Low Alarm Thres. This displays the low value alarm threshold for each monitored DDMI parameter. The OLT
reports an alarm signal to the Optical Line Terminal (OLT) if the monitored DDMI parameter
reaches this value.
Temperature (C) The transceiver's temperature in Celsius. The normal range is 0-70 degrees.
Voltage (V) The transceiver's voltage in Volts. The normal range is 3.13-3.47 Volts.
TX Bias (mA) The transceiver's bias current in mA. The normal range is 4-50 mA.
TX Power (dbm) The transceiver's optical transmitting power in dBm. The normal range is 0.5 to 5 dBm. N/A
displays when a transceiver is not connected to the PON port.
RX Power (dbm) The transceiver's optical receiving power in dBm. The normal range is -6 to -28 dBm. N/A
displays when a transceiver is not connected to the PON port.
Table 119 Advanced Applications > PON DDMI > PON DDMI Setup
LABEL DESCRIPTION

Table of Contents

Related product manuals