Chapter 37 OLT Registration
OLT2406 User’s Guide
297
Register-
Method
Select the method (A, C, C-autolock, or D) the OLT uses to register ONTs connected to the port.
A: (used in this example) requires the serial number and password the ONT sends to match the ones
you configure on the OLT.
C: requires the physical layer operations and maintenance (PLOAM) password the ONT sends to
match what you configure on the OLT.
C-autolock: requires the serial number the ONT sends to match the one you configure on the OLT.
D: automatically registers the ONT and brings it into service without checking the serial number or
password. The ONT registered with format D will lose the template settings when it’s not connected
to the OLT. If the ONT is discovered the next time, the OLT will apply the template according to the
settings configured in the Advanced Application > OLT Registration screen automatically.
E: automatically registers the ONT and brings it into service without checking the serial number or
password. The ONT registered with format E will keep the template settings even when the it’s not
connected to the OLT. If the ONT is discovered the next time, it has the template settings already, so
the OLT won’t apply the template again.
Choose method D or E to apply the selected ONT template to all ONTs this GPON interface registers.
For other registration methods, you can apply a different template for each ONT in the ONT Quick
Setup screen.
Transceiver Select 12 (Hisense class C+ transceiver) for the type of the default transceiver the PON port uses. A
Hisense class C+ transceiver is provided along with the package.
ONT
Template
Active
Select this to enable the ONT template.
Template Select the ONT template to use for the GPON interface. You can modify these templates in the
Advanced Application > ONT Template screen or manually using CLI commands.
Note: This field is grayed out when you select A, C, or C-autolock in the Register-Method
field.
Fec Active Select this to enable the Forward Error Correction (FEC) feature. See Section 37.1.2 on page 295 for
more information about FEC.
Ranging
Distance
Configure the maximum ranging distance for the GPON interface.
Add Click Add to apply the settings to a GPON port.
Cancel Click Cancel to clear the fields.
Clear Click Clear to return the screen’s settings to the defaults.
AID This is the identifier for the GPON interface.
Register-
Method
This displays the method (A, C, C-autolock, D, or E) the OLT registers ONTs connected to the port.
Transceiver This displays the type of transceiver (12) the PON port uses.
Template This displays the ONT template to use for the GPON interface.
ONT
Template
Active
This displays whether the ONT template is enabled or not.
Fec Active This displays whether the Forward Error Correction (FEC) feature is enabled or not.
Ranging
Distance
This displays the maximum ranging distance for the GPON interface.
Active This displays whether the GPON interface settings for the GPON interface is active or not.
Delete Select this for one or more profiles and click Delete to remove them.
* Use this row to select all of the profiles for deletion.
Table 127 Advanced Application > OLT Registration
LABEL DESCRIPTION
To Next Page
Loading...
