EasyManua.ls Logo

ZyXEL Communications OLT2406 - Page 366

ZyXEL Communications OLT2406
766 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 44 Access Control
OLT2406 User’s Guide
366
lldp lldpRemTablesChange 1.0.8802.1.1.2.0.0.1 The trap is sent when entries in the
remote database have any updates.
Link Layer Discovery Protocol (LLDP),
defined as IEEE 802.1ab, enables LAN
devices that support LLDP to
exchange their configured settings.
This helps eliminate configuration
mismatch issues.
transceiver-ddm DDMIRxPowerEventOn
DDMITemperatureEventOn
DDMITxBiasEventOn
DDMITxPowerEventOn
DDMIVoltageEventOn
1.3.6.1.4.1.890.1.5.17.5.31.2.1
1.3.6.1.4.1.890.1.5.17.6.31.2.1
This trap is sent when one of the
device operating parameters (such
as transceiver temperature, laser bias
current, transmitted optical power,
received optical power, and
transceiver supply voltage) is above
or below a factory set normal range.
DDMIRxPowerEventClear
DDMITemperatureEventClear
DDMITxBiasEventClear
DDMITxPowerEventClear
DDMIVoltageEventClear
1.3.6.1.4.1.890.1.5.17.5.31.2.2
1.3.6.1.4.1.890.1.5.17.6.31.2.2
This trap is sent when all device
operating parameters return to the
normal operating range.
ploam ONTLOSiEventOn 1.3.6.1.4.1.890.1.5.17.5.31.2.1
1.3.6.1.4.1.890.1.5.17.6.31.2.1
This trap is sent when the LOSi (Loss of
signal for ONUi) is received.
ONTLOSiEventClear 1.3.6.1.4.1.890.1.5.17.5.31.2.2
1.3.6.1.4.1.890.1.5.17.6.31.2.2
This trap is sent when the LOSi (Loss of
signal for ONUi) is cleared.
ONTLOFiEventOn 1.3.6.1.4.1.890.1.5.17.5.31.2.1
1.3.6.1.4.1.890.1.5.17.6.31.2.1
This trap is sent when the LOFi (Loss of
frame of ONUi) is received.
ONTLOFiEventClear 1.3.6.1.4.1.890.1.5.17.5.31.2.2
1.3.6.1.4.1.890.1.5.17.6.31.2.2
This trap is sent when the LOFi (Loss of
frame of ONUi) is cleared.
ONTLOAMiEventOn 1.3.6.1.4.1.890.1.5.17.5.31.2.1
1.3.6.1.4.1.890.1.5.17.6.31.2.1
This trap is sent when the LOAMi (Loss
of PLOAM for ONUi) is received.
ONTLOAMiEventClear 1.3.6.1.4.1.890.1.5.17.5.31.2.2
1.3.6.1.4.1.890.1.5.17.6.31.2.2
This trap is sent when the LOAMi (Loss
of PLOAM for ONUi) is cleared.
ONTLCDGiEventOn 1.3.6.1.4.1.890.1.5.17.5.31.2.1
1.3.6.1.4.1.890.1.5.17.6.31.2.1
This trap is sent when the LCDGi (Loss
of GEM channel delineation) is
received.
ONTLCDGiEventClear 1.3.6.1.4.1.890.1.5.17.5.31.2.2
1.3.6.1.4.1.890.1.5.17.6.31.2.2
This trap is sent when the LCDGi (Loss
of GEM channel delineation) is
cleared.
ONTRDIiEventOn 1.3.6.1.4.1.890.1.5.17.5.31.2.1
1.3.6.1.4.1.890.1.5.17.6.31.2.1
This trap is sent when the RDIi (Remote
defect indication of ONUi) is received.
ONTRDIiEventClear 1.3.6.1.4.1.890.1.5.17.5.31.2.2
1.3.6.1.4.1.890.1.5.17.6.31.2.2
This trap is sent when the RDIi (Remote
defect indication of ONUi) is cleared.
Table 175 SNMP Interface Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION

Table of Contents

Related product manuals