Chapter 49 ARP Table
OLT2406 User’s Guide
391
Figure 245 Management > ARP Table
The following table describes the labels in this screen.
Table 186 Management > ARP Table
LABEL DESCRIPTION
Condition Specify how you want the OLT to remove ARP entries when you click Flush.
Select All to remove all of the dynamic entries from the ARP table.
Select IP Address and enter an IP address to remove the dynamic entries learned with the
specified IP address.
Select Port and enter a port number to remove the dynamic entries learned on the specified port.
Flush Click Flush to remove the ARP entries according to the condition you specified.
Cancel Click Cancel to return the fields to the factory defaults.
Index This is the ARP table entry number.
IP Address This is the IP address of a device connected to a OLT port with the corresponding MAC address
below.
MAC Address This is the MAC address of the device with the corresponding IP address above.
VID This field displays the VLAN to which the device belongs.
Port This field displays the port to which the device connects. CPU means this IP address is the OLT’s
management IP address.
Type This shows whether the IP address is dynamic (learned by the OLT) or static (manually configured
in the Basic Setting > IP Setup screen).
To Next Page
Loading...
