Chapter 54 Basic Settings
OLT2406 User’s Guide
420
The following command displays the interface status of GPON port 3 in slot 3 of the OLT.
The following command displays the slot status of slot 3.
show interfaces GE-3-3
AID |Link Status LACP TxPkts RxPkts Errors Tx_KBs/s Rx_KBs/s Up_Time
------+----------------------------------------------------------------------------
ge-3-3|2500M/F FORWARDING None 89700 0 0 0.117 0.0 16:13:24
+----------------------------------------------------------------------------
|Details
+----------------------------------------------------------------------------
|TX Packet Unicast :27 RX Packet Unicast : 0
| Multicast:58503 Multicast : 0
| Broadcast:31170 Broadcast : 0
| Pause :0 Pause : 0
| Tagged :0 Control : 0
|TX Collison Single :0 Distribution 64 : 88421
| Multiple:0 65-127 : 785
| Excessive:0 128-255 : 0
| Late :0 256-511 : 468
|Error Packet RX CRC :0 512-1023 : 26
| Length :0 1024-1518 : 0
| Runt :0 Giant : 0
----------------------+-----------------------------------------------------------
OLT2406# show interfaces slot slot-3 status
AID | Base_Address IP0 IP1 MAC0
MAC1 Support_Link
----------------------+---------------------------------------------------------
-------------------------------------------
slot-3 | 0x be000000 127.168.0.2 127.168.0.2
00:19:cb:13:57:28 00:19:cb:13:57:29 0
+---------------------------------------------------------
---------------------------------------------
| Details
+---------------------------------------------------------
---------------------------------------------
| Status: READY
| Device Version: 0x2060701
| Driver Version: 0
| Firmware Date: Dec 25 2012, 17:50:33
----------------------+---------------------------------------------------------