Chapter 56 VLAN
OLT2406 User’s Guide
445
This example shows the VLAN table.
The following table describes the labels in this display.
OLT2406# show vlan
The Number of VLAN : 3
Idx. VID Status Elap-Time
---- ---- --------- -----------
1 1 Static 163:25:23
TagCtl Tagged :
TagCtl Untagged :
ge-3-1,ge-3-2,ge-3-3,ge-3-4
ge-4-1,ge-4-2,ge-4-3,ge-4-4
ge-5-1,ge-5-2,ge-5-3,ge-5-4
ge-6-1,ge-6-2,ge-6-3,ge-6-4
msc-1-1,msc-1-2,msc-1-3,msc-1-4,msc-1-5,msc-1-6
2 2 Static 311:12:34
TagCtl Tagged :
ge-3-1,ge-3-2,ge-3-3,ge-3-4
ge-4-1,ge-4-2,ge-4-3,ge-4-4
ge-5-1,ge-5-2,ge-5-3,ge-5-4
ge-6-1,ge-6-2,ge-6-3,ge-6-4
TagCtl Untagged :
2 100 Static 161:54:46
TagCtl Tagged :
TagCtl Untagged :
3 2000 Static 162:22:11
TagCtl Tagged :
ge-5-1,ge-5-2,ge-5-3,ge-5-4
TagCtl Untagged :
ge-3-1,ge-3-2,ge-3-3,ge-3-4
ge-4-1
Table 219 show vlan
LABEL DESCRIPTION
The Number of VLAN Displays the number of VLANs on the OLT.
Idx. Displays an entry number for each VLAN.
VID Displays the VLAN identification number.
Status Displays how this VLAN was added to the OLT.
Dynamic: The VLAN was added via GVRP.
Static: The VLAN was added as a permanent entry
Other: The VLAN was added in another way, such as Multicast VLAN Registration (MVR).
Elap-Time Displays how long it has been since a dynamic VLAN was registered or a static VLAN was
set up.
TagCtl Displays untagged and tagged ports.
Untagged: These ports do not tag outgoing frames with the VLAN ID.
Tagged: These ports tag outgoing frames with the VLAN ID.