ZyXEL Communications OLT2406 - Page 462

OLT2406 User’s Guide
462
aaa accounting exec <start-
stop|stop-only>
<radius|tacacs+> [broadcast]
Enables accounting of administrative sessions
via SSH, Telnet and console port and specifies
the mode and protocol method.
Sends accounting information for administrative
sessions via SSH, Telnet and console port to all
configured accounting servers at the same
time.
C13
aaa accounting system
<radius|tacacs+>
Enables accounting of system events and
specifies the protocol method.
C13
aaa accounting system
<radius|tacacs+> [broadcast]
Enables accounting of system events and
specifies the protocol method.
Sends accounting information for system events
to all configured accounting servers at the same
time.
C13
aaa accounting update periodic <1-
2147483647>
Sets the update period (in minutes) for
accounting sessions. This is the time the OLT waits
to send an update to an accounting server after
a session starts.
C13
aaa authentication enable
<method1> [<method2>...]
Specifies which method should be used first,
second, and third for checking privileges.
method: enable, radius, or tacacs+.
C14
aaa authentication login <method1>
[<method2>...]
Specifies which method should be used first,
second, and third for the authentication of login
accounts.
method: enable, radius, or tacacs+.
C14
aaa authorization dot1x radius
Enables authorization for IEEE 802.1x clients using
RADIUS.
C14
aaa authorization exec
<radius|tacacs+>
Specifies which method (radius or tacacs+)
should be used for administrator authorization.
C14
no aaa accounting commands
Disables accounting of command sessions on
the OLT.
C13
no aaa accounting dot1x
Disables accounting of IEEE 802.1x
authentication sessions on the OLT.
C13
no aaa accounting exec
Disables accounting of administrative sessions
via SSH, Telnet or console on the OLT.
C13
no aaa accounting system
Disables accounting of system events on the
OLT.
C13
no aaa accounting update
Resets the accounting update interval to the
default value.
C13
no aaa authentication enable
Resets the method list for checking privileges to
its default value.
C14
no aaa authentication login
Resets the method list for the authentication of
login accounts to its default value.
C14
no aaa authorization dot1x
Disables authorization of allowing an IEEE 802.1x
client to have a different bandwidth limit or
VLAN ID assigned via the external server.
C14
no aaa authorization exec
Disables authorization of allowing an
administrator which logs into the OLT through
Telnet or SSH to have a different access privilege
level assigned via the external server.
C14
show aaa accounting
Displays accounting settings configured on the
OLT.
E3
Table 229 AAA Commands (continued)
COMMAND DESCRIPTION M P