Chapter 64 Bandwidth Control
OLT2406 User’s Guide
482
bandwidth-threshold ingress
<kbps>
Sets the interface’s bandwidth rate threshold for
incoming traffic.
The range of an XE port is from 0 to 10000000
Kbps.
The range of a GPON port is from 0 to 2500000
Kbps.
The range of a GE port is from 0 to 1000000
Kbps.
C13
no bandwidth-threshold egress
Removes the interface’s bandwidth rate
threshold for outgoing traffic.
C13
no bandwidth-threshold ingress
Removes the interface’s bandwidth rate
threshold for incoming traffic.
C13
show interfaces config <aid>
bandwidth-threshold
Displays the bandwidth control configuration for
the specified port.
aid: <msc|ge|pon>-<slot>-<port>
E13
Table 241 Bandwidth Control Commands (continued)
COMMAND DESCRIPTION M P
To Next Page
Loading...
