Chapter 96 Remote ONT
OLT2406 User’s Guide
674
exit
Leaves the slot configuration sub-commands. C 13
show remote uniport <aid> pm-counter
<cr>
Displays the specified UNI port’s PM
(performance monitoring) counter.
aid: uniport-<slot>-<pon>-<ont>-<card>-
<uniport>
E13
show remote uniport <aid> pmenable <cr> Displays if PM (performance monitoring) is
enabled or disabled on the specified UNI port.
aid: uniport-<slot>-<pon>-<ont>-<card>-
<uniport>
E13
Table 354 UNI Port General Command Parameters (continued)
LABEL DESCRIPTION M P
To Next Page
Loading...
