ZyXEL Communications OLT2406 - Page 696

OLT2406 User’s Guide
696
no raps <port0|port1>
Removes the ERPS RAPS configuration. C 13
ccm <port0|port1> groupName
<name-string> level <0-7> vlan
<1-4094> txName <1-65535>
period <1-7> priority <0-7>
int-priority <0-7> reName <1-
65535>
Sets the CCM configuration. The ring links of
each Ethernet ring node are monitored by
individually exchanging continuity check
messages (CCMs).
groupName: CCM group name, length 0-32
level: CCM packet level, 0-7
vlan: CCM vlan, 1-4094
txName: the send CCM name, cannot be the
same as reName, 1-65535.
period: send CCM packet rate, 1-7,
1:3.3ms|2:10ms|3:100ms|4:1s|5:10s|6:1min|7:1
0min
priority: VLAN priority, 0-7
int-priority: internal priority, 0-7
reName: the receive CCM name from the
remote end cannot be the same as the
txName, 1-65535.
C13
raps <port0|port1> vlan <1-
4094> priority <0-7> level <0-
7>
Sets the RAPS configuration. The ERP switching
mechanism requires the R-APS protocol to
coordinate the switching behavior among all
Ethernet ring nodes.
vlan: RAPS vlan, 1-4094
priority: RAPS priority, 0-7
level: RAPS packet level, 0-7
C13
<enable|disable>
Enables or disables the ERPS ring. C 13
no erps-ring <1|2|3>
Disables ERPS for the specified ring. C 13
Table 368 ERPS Commands (continued)
COMMAND DESCRIPTION M P