ZyXEL Communications OLT2406 - Page 700

Chapter 101 LLDP
OLT2406 User’s Guide
700
lldp transmit-interval <seconds>
Configures the transmit interval time for sending
LLDP frames.
seconds: 1-10 seconds
C13
lldp transmit-hold <value>
Configures the time-to-live (TTL) multiplier of the
LLDP frames. The device information on the
neighboring devices ages out and is discarded
when its corresponding TTL expires. The TTL value
is derived by multiplying the TTL multiplier by the
LLDP frames’ transmit interval. Set the LLDP
packet transmitting interval shorter than its TTL to
update the OLT’s device information in the
neighboring devices before it ages out.
value: 2-10, the interval multiplier to set the local
LLDP data TTL.
C13
lldp transmit-delay <seconds>
Configures the delay (in seconds) between the
successive LLDP frame transmissions initiated by
value or status changes in the local system.
seconds: 1-8192 seconds
C13
lldp reinitialize-delay <seconds>
Configures the number of seconds for LLDP to
wait to re-initialize a port that was disabled.
seconds: 1-10 seconds
C13
show lldp config
Displays the global LLDP configuration. E 3
show lldp config interface port-
channel <aid>
Displays the LLDP configuration for the specified
ports.
aid: <msc|ge|pon>-<slot>-<port>[&&-
<port>]
E3
show lldp info local
Displays the LLDP local information (globally). E 3
show lldp info local interface
port-channel <aid>
Displays the LLDP local information for the
specified ports.
aid: <msc|ge|pon>-<slot>-<port>[&&-
<port>]
E3
show lldp info remote
Displays the LLDP remote information (globally). E 3
show lldp info remote interface
port-channel <aid>
Displays the LLDP remote information for the
specified ports.
aid: <msc|ge|pon>-<slot>-<port>[&&-
<port>]
E3
show lldp info statistic
Displays the LLDP statistics (globally). E 3
show lldp info statistic interface
port-channel <aid>
Displays the LLDP statistics for the specified ports.
aid: <msc|ge|pon>-<slot>-<port>[&&-
<port>]
E3
clear lldp remote-info
Deletes all LLDP remote information. E 13
clear lldp remote-info interface
port-channel <aid>
Deletes the LLDP remote information for the
specified ports.
aid: <msc|ge|pon>-<slot>-<port>[&&-
<port>]
E13
clear lldp statistic
Resets the LLDP statistics to zero. E 13
Table 370 LLDP Commands (continued)
COMMAND DESCRIPTION M P