Chapter 6 Tutorials
OLT2406 User’s Guide
77
The settings in this tutorial are as the following.
1 Access the OLT through http://192.168.1.1 by default. Log into the OLT by entering the username
(default: admin) and password (default: 1234).
2 Go to Advanced Application > VLAN > Static VLAN, and create a VLAN with ID of 100. Add ports 10, 11
and 12 in the VLAN by selecting Fixed in the Control field as shown.
Deselect Tx Tagging because you don’t want outgoing traffic to contain this VLAN tag.
Click Add.
Figure 45 Tutorial: Create a VLAN and Add Ports to It
3 Go to Advanced Application > VLAN > VLAN Configuration > VLAN Port Setting, and set the PVID of the
ports 10, 11 and 12 to 100. This tags untagged incoming frames on ports 10, 11 and 12 with the tag 100.
Table 14 Tutorial: Settings in this Tutorial
HOST PORT CONNECTED VLAN PVID DHCP SNOOPING PORT TRUSTED
DHCP Server (A) 10 1 and 100 100 Yes
DHCP Client (B) 11 1 and 100 100 No
DHCP Client (C) 12 1 and 100 100 No
To Next Page
Loading...
