Chapter 7 Status
OLT2406 User’s Guide
93
Figure 60 Port Status: Port Details
The following table describes the labels in this screen.
Table 16 Port Status: Port Details
LABEL DESCRIPTION
Port Info
Port NO. This field displays the port number you are viewing.
Name This field displays the name of the port.
Link This field displays the speed (such as 100M for 100Mbps, 1000M for 1000 Mbps, 2.5G for 2.5 Gbps,
or 10G for 10 Gbps) and the duplex (F for full duplex or H for half). This field displays Down if the
port is not connected to any device.
State If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port (see Chapter
14 on page 131 for more information).
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it displays STOP.
LACP This field shows if LACP is enabled on this port or not.
TxPkts This field shows the number of transmitted frames on this port
RxPkts This field shows the number of received frames on this port
To Next Page
Loading...
