Anritsu MS9740A - Page 101

3.4 Device Message Details
3-55
3
Message Details
When executing the WDM Filter application
No.
Parameter type
Description
1
<numeric>
PeakCount: Channel count
2
<numeric>
No: Channel number 1
3
<numeric>
CH Wl: 1st
channel wavelength (m)
4
<numeric>
Spacing: 1st channel spacing (m)
5
<numeric>
PK Wl: 1st peak wavelength (m)
6
<numeric>
CH Lvl: 1st channel level (dBm)
or 1st channel loss (dB)
7
<numeric>
x dB BW: 1st channel bandwidth (Cut
Level A) (m)
8
<numeric>
y dB BW: 1st channel bandwidth (Cut
Level B) (m)
9
<numeric>
x dB Wl: Threshold wavelength of the
1st channel (Cut Level A) (m)
10
<numeric>
y dB Wl: Threshold wavelength of the
1st channel (Cut Level B) (m)
11
<numeric>
PK Lvl: Peak level (dBm) or minimum
loss (dB) of the 1st channel
12
<numeric>
Ripple: 1st channel ripple (dB)
:
11n–9
<numeric>
No: Channel number
11n–8
<numeric>
CH Wl: nth channel wavelength (m)
11n–7
<numeric>
Spacing: nth channel interval (m)
11n–6
<numeric>
PK Wl: nth peak wavelength (m)
11n–5
<numeric>
CH Lvl: nth channel level (dBm)
or nth channel loss (dB)
11n–4
<numeric>
x dB BW: nth channel bandwidth (Cut
Level A) (m)
11n–3
<numeric>
y dB BW: nth channel bandwidth (Cut
Level B) (m)
11n–2
<numeric>
x dB Wl: nth channel threshold
wavelength (Cut Level A) (m)
11n–1
<numeric>
y dB Wl: nth channel threshold
wavelength (Cut Level B) (m)
11n
<numeric>
PK Lvl: Peak level (dBm) or minimum
loss (dB) of nth channel
11n+1
<numeric>
Ripple: nth channel ripple (dB)
The spacing of the 1st peak wavelength is always “0”.