Anritsu MS9740A - Calculate:parameter[:Category]:Nf:pout; Calculate:parameter[:Category]:Nf:rbwidth

Chapter 3 Message Details
3-142
:CALCulate:PARameter[:CATegory]:NF:POUT
Function
This command selects the trace memory that saves Pout for the Optical
AMP (WDM) application.
This command queries the trace memory that saves Pout for the Optical
AMP (WDM) application.
Syntax
:CALCulate:PARameter[:CATegory]:NF:POUT <trace>
:CALCulate:PARameter[:CATegory]:NF:POUT?
Response Data
<trace>
Example of Use
:CALCulate:PARameter:CATegory:NF:POUT H
:CALCulate:PARameter:CATegory:NF:POUT?
>H
:CALCulate:PARameter[:CATegory]:NF:RBWidth
Function
This command sets and queries the Actual Resolution for the Optical
AMP (WDM) application.
Syntax
:CALCulate:PARameter[:CATegory]:NF:RBWidth <switch>
:CALCulate:PARameter[:CATegory]:NF:RBWidth?
<switch>
Actual Resolution
0|MEASured
Measured
1|CAL
Initial
Response Data
0|1
Example of Use
:CALCulate:PARameter:CATegory:NF:RBWidth MEASured
:CALCulate:PARameter:CATegory:NF:RBWidth?
>0