Anritsu MS9740A - Calculate:parameter[:Category]:Ld:ndbwidth

3.4 Device Message Details
3-117
3
Message Details
:CALCulate:PARameter[:CATegory]:LD:NDBWidth
Function
This command sets and queries the ndB Width parameter for the LD
Module application.
Syntax
:CALCulate:PARameter[:CATegory]:LD:NDBWidth <numeric>[DB]
:CALCulate:PARameter[:CATegory]:LD:NDBWidth?
<numeric>: Cut Level
Range 0.1 to 50.0 dB
Resolution 0.1 dB
If a suffix is omitted, the unit will be dB.
Response Data
<numeric>
<numeric>: Cut Level (dB)
+1.00000000E
–
001 to +5.00000000E+001
Example of Use
:CALCulate:PARameter:CATegory:LD:NDBWidth 20
:CALCulate:PARameter:CATegory:LD:NDBWidth?
>+2.00000000E+001