Anritsu MS9740A - Calculate:parameter[:Category]:Ld:threshold

3.4 Device Message Details
3-127
3
Message Details
:CALCulate:PARameter[:CATegory]:LD:THReshold
Function
This command sets and queries the slice level in Signal Parameter in the
LD Module application.
Syntax
:CALCulate:PARameter[:CATegory]:LD:THReshold
<numeric>[DB]
:CALCulate:PARameter[:CATegory]:LD:THReshold?
<numeric> Slice level
Range 0.1 to 50.0 dB
Resolution 0.1 dB
If a suffix is omitted, the unit will be dB.
Response Data
<numeric>
<numeric>: Slice level (dB)
+1.00000000E–001 to +5.00000000E+001
Example of Use
:CALCulate:PARameter:CATegory:LD:THReshold 3
:CALCulate:PARameter:CATegory:LD:THReshold?
>+3.00000000E+000