Anritsu MS9740A - [:Sense]:Bandwidth|Bwidth:video; Sense:chop:state

Chapter 3 Message Details
3-236
[:SENSe]:BANDwidth|BWIDth:VIDeo
Function
This command sets and queries the video band width.
Syntax
[:SENSe]:BANDwidth|BWIDth:VIDeo <numeric>[<unit_h>]
[:SENSe]:BANDwidth|BWIDth:VIDeo?
Set any of the following values.
10HZ|100HZ|200HZ|1KHZ|2KHZ|10KHZ|100KHZ|1MHZ
|10|100|200|1000|2000|10000|100000|1000000
If a suffix is omitted, the unit will be Hz.
Response Data
<numeric>
<numeric>: Video Band Width (Hz)
Example of Use
:SENSe:BANDwidth:VIDeo 1000
:SENSe:BWIDth:VIDeo?
>+1.00000000E+003
[:SENSe]:CHOP[:STATe]
Function
This command sets and queries the
dynamic range
High/Normal.
Syntax
[:SENSe]:CHOP[:STATe] 0|1|OFF|ON
[:SENSe]:CHOP[:STATe]?
0|OFF: NORMAL
1|ON: HIGH
Response Data
0|1
Example of Use
:SENSe:CHOP:STATe ON
:SENSe:CHOP:STATe?
>1