Anritsu MS9740A - Appendix A Message Codes

A-1
Appendix
Appendix A
Appendix A Message Codes
This appendix describes the meanings of response numbers (codes) for
the
:SYSTem:ERRor[:NEXT]?
message.
(1) Command errors [–100 to –199]
Error codes [–100 to –199] indicate that an IEEE488.2 syntax error
occurs. When an error occurs, bit 5 of the event status register is set.
Table A-1 Command Error Codes
Code Meaning
113
Command header undefined
–140
Character data error
–140
Illegal character in input string
–160
Block data error