Anritsu MS9740A - Calculate:parameter[:Category]:Amp:pase

3.4 Device Message Details
3-107
3
Message Details
:CALCulate:PARameter[:CATegory]:AMP:PASE
Function
This command selects and queries the trace memory saving Pase at the
Optical AMP application.
Note:
The Pase trace memory can be selected when optical amplifier
measurement method is not polarization nulling (PLZN Nulling).
However, the Pase trace memory cannot be used when using the
measurement method other than PLZN Nulling.
Syntax
:CALCulate:PARameter[:CATegory]:AMP:PASE <trace>
:CALCulate:PARameter[:CATegory]:AMP:PASE?
Response Data
<trace>
Example of Use
:CALCulate:PARameter:CATegory:AMP:PASE D
:CALCulate:PARameter:CATegory:AMP:PASE?
>D