Chapter 3 Message Details
3-118
:CALCulate:PARameter[:CATegory]:LD:NNORmalize
Function
This command sets and queries the Noise BW of Noise Parameter for the
LD Module application.
Syntax
:CALCulate:PARameter[:CATegory]:LD:NNORmalize
<numeric>[<unit_m>]
:CALCulate:PARameter[:CATegory]:LD:NNORmalize?
<numeric>: Noise BW setting value
Range 0.1 to 1.0 nm
Resolution 0.1 nm
If a suffix is omitted, the unit will be m.
Response Data
<numeric>
<numeric>: Noise BW setting value (m)
+1.00000000E–010 to +1.00000000E–009
Example of Use
:CALCulate:PARameter:CATegory:LD:NNORmalize 0.3NM
:CALCulate:PARameter:CATegory:LD:NNORmalize?
>+3.00000000E-010
To Next Page
Loading...
