Anritsu MS9740A - Calculate[1|2|3|4|5|6]:Average:count

3.4 Device Message Details
3-37
3
Message Details
:CALCulate[1|2|3|4|5|6]:AVERage:COUNt
Function
This command sets the average processing (sweep averaging) count.
This command queries the average processing (sweep averaging) count.
Syntax
:CALCulate[1|2|3|4|5|6]:AVERage:COUNt <numeric>
:CALCulate[1|2|3|4|5|6]:AVERage:COUNt?
Specify the Active trace (A to F) by specifying a number from 1 to 6.
When omitted, the Active trace is not changed.
Range 1 to 1000
Resolution 1
Response Data
<numeric>
<numeric>: Sweep averaging setting count 1 to 1000
Example of Use
:CALCulate2:AVERage:COUNt 250
:CALCulate2:AVERage:COUNt?
>250