Anritsu MS9740A - Calculate:offset:source

3.4 Device Message Details
3-103
3
Message Details
:CALCulate:OFFSet:SOURce
Function
This command sets and queries the loss correction factor for signal level
of the Optical AMP (WDM) application.
Syntax
:CALCulate:OFFSet:SOURce <numeric value>[DB]
:CALCulate:OFFSet:SOURce?
<numeric>: Pin Loss (dB)
Loss correction factor for signal level coefficient
Range –10.00 to 10.00 dB
Resolution 0.01 dB
If a suffix is omitted, the unit will be dB.
Response Data
<numeric>
<numeric>: Pin Loss (dB)
–1.00000000E+001 to +1.00000000E+001
Example of Use
:CALCulate:OFFSet:SOURce -0.5
:CALCulate:OFFSet:SOURce?
>-5.00000000E-001