Anritsu MS9740A - Calculate:parameter[:Category]:Led

Chapter 3 Message Details
3-128
:CALCulate:PARameter[:CATegory]:LED
Function
This command exercutes the LED application and specifies the
parameters.
This command queries the parameters for the LED application.
Syntax
:CALCulate:PARameter[:CATegory]:LED
<numeric>,<numeric>,<numeric>
:CALCulate:PARameter[:CATegory]:LED?
No.
Parameter Type
Range
Description
1
<numeric>
0.1 to 50.00
dB
Res. 0.01 dB
Cut Level
2
<numeric>
–10.00 to
10.00dB
Res. 0.01 dB
Total power correction value
(dB)
3
<numeric>
1.00 to 10.00
Res. 0.01
K: Standard deviation factor
Response Data
<numeric>,<numeric>,<numeric>
No.
Parameter Type
Description
1
<numeric>
Cut Level (dB)
2
<numeric>
Total power correction value
(dB)
3
<numeric>
K: Standard deviation factor
Example of Use
:CALCulate:PARameter:CATegory:LED 35,0,2.35
:CALCulate:PARameter:CATegory:LED?
>7,+3.5000000E+001,+0.0000000E+000,+2.3500000E+000