Chapter 3 Message Details
3-182
:CALCulate[1|2|3|4|5|6]:TPOWer:STATe
Function
This command sets and queries the On/Off state of the integrated power
analysis of spectrum level.
Syntax
:CALCulate[1|2|3|4|5|6]:TPOWer:STATe 0|1|OFF|ON
:CALCulate[1|2|3|4|5|6]:TPOWer:STATe?
Specify the Active trace (A to F) by specifying a number from 1 to 6.
When omitted, the Active trace is not changed.
0|OFF: Sets the integrated power analysis of spectrum level to Off.
1|ON: Sets the integrated power analysis of spectrum level to On.
Response Data
0|1
Example of Use
:CALCulate:TPOWer:STATe ON
:CALCulate:TPOWer:STATe?
>1
To Next Page
Loading...
