Anritsu MS9740A - [:Sense][:Wavelength]:Offset

Chapter 3 Message Details
3-242
[:SENSe][:WAVelength]:OFFSet
Function
This command sets and queries the wavelength offset and moves the
waveform on the screen by the offset.
Syntax
[:SENSe][:WAVelength]:OFFSet <numeric>[<unit_m>]
[:SENSe][:WAVelength]:OFFSet?
Range –1.00 to 1.00 nm
Resolution 0.01 nm
If a suffix is omitted, the unit will be m.
Response Data
<numeric>
<numeric>: Wavelength offset value (m)
–1.00000000E
–
009 to +1.00000000E–009
Example of Use
:SENSe:WAVelength:OFFSet -0.05NM
:SENSe:WAVelength:OFFSet?
>-5.00000000E-011