Anritsu MS9740A - Mmemory:store:atrace

3.4 Device Message Details
3-227
3
Message Details
:MMEMory:PROTect:XML? <file_name>,D|<user_drive>
It is not necessary to add the extension to file_name.
0|OFF: Permits deletion
1|ON: Prohibits deletion
Response Data
0|1
Example of Use
:MMEMory:PROTect:XML 'Trace-OPT_AMP',OFF,E
:MMEMory:PROTect:XML? 'Trace-OPT_AMP',E
>0
:MMEMory:STORe:ATRace
Function
This command saves all trace CSV and XML files to the specified device.
Files are saved to the following directory in the specified drive.
x:\Anritsu Corporation\Optical Spectrum Analyzer\User Data\CSV Data
x:\Anritsu Corporation\Optical Spectrum Analyzer\User Data\All Trace Data
When an error is caused because a specified device is not found, 1 is
written to the execution error bit of the standard event status register.
Syntax
:MMEMory:STORe:ATRace <file_name>[,<switch>]
It is not necessary to add the extension to file_name.
<switch>: Specify a device from the following.
INTernal: Internal storage media (Drive D)
EXTernal: USB storage media
When there are two or more USB storage media, the drive
having the first drive letter (alphabetically) is specified
automatically.
If <switch> is omitted, it defaults to INTernal.
Example of Use
:MMEMory:STORe:ATRace 'WDM_Filter_20131201-1'