Anritsu MS9740A - Calculate:parameter:category:ld:sres

Chapter 3 Message Details
3-126
:CALCulate:PARameter[:CATegory]:LD:SRES
Function
This command sets and queries the level resolution to detect the side
mode for the LD module application.
Syntax
:CALCulate:PARameter[:CATegory]:LD:SRES <numeric>[DB]
:CALCulate:PARameter[:CATegory]:LD:SRES?
<numeric>: Level resolution
Range 0.10 to 10.00 dB
Resolution 0.01 dB
If a suffix is omitted, the unit will be dB.
Response Data
<numeric>
<numeric>: Level resolution (dB)
+1.00000000E–001+1.00000000E+001
Example of Use
:CALCulate:PARameter:CATegory:LD:SRES 0.5
:CALCulate:PARameter:CATegory:LD:SRES?
>+5.00000000E-001