Anritsu MS9740A - Calculate:snoise

Chapter 3 Message Details
3-176
:CALCulate:SNOise
Function
This command sets and queries the NF calculation method of the Optical
AMP (WDM) application.
Syntax
:CALCulate:SNOise 0|1|OFF|ON
:CALCulate:SNOise?
0|OFF: Sets the NF calculation method to NF (S-ASE).
1|ON: Sets the NF calculation method to NF (To t al).
Response Data
0|1
Example of Use
:CALCulate:SNOise ON
:CALCulate:SNOise?
>1