Anritsu MS9740A - Calculate:parameter[:Category]:Wfil:ripple

3.4 Device Message Details
3-171
3
Message Details
:CALCulate:PARameter[:CATegory]:WFIL:RIPPle
Function
This command sets and queries the Ripple Span for the WDM Filter
application.
Syntax
:CALCulate:PARameter[:CATegory]:WFIL:RIPPle
<numeric>[<unit_m>]
:CALCulate:PARameter[:CATegory]:WFIL:RIPPle?
Range 0.01 to 999.99 nm
Resolution 0.01 nm
If a suffix is omitted, the unit will be m.
Response Data
<numeric>
<numeric>: Ripple Span (m)
+1.00000000E–011 to +9.99990000E–007
Example of Use
:CALCulate:PARameter:CATegory:WFIL:RIPPle 1.5NM
:CALCulate:PARameter:CATegory:WFIL:RIPPle?
>+1.50000000E-009