Anritsu MS9740A - Trace:attribute[:<Trace_Name>|Trg]

3.4 Device Message Details
3-253
3
Message Details
:TRACe:ATTRibute[:<trace_name>|TRG]
Function
This command sets and queries the active trace type and the storage
Mode.
Syntax
:TRACe:ATTRibute[:<trace_name>|TRG] <switch>
:TRACe:ATTRibute[:<trace_name>|TRG]?
<switch>: Specify either Trace Type or Storage Mode from the
following.
WRITe: Write
FIX: Fix
CALC: Calculate
RAVG: Sweep Average
MAX: Max Hold
MIN: Min Hold
OVL: Overlap
BLANk: Blank
Response Data
0|1|2|3|4|5|6|7
The response data values are described below.
Response
Trace type
Storage Mode
0
Write
Off
1
Fix
–
2
Write
Max Hold
3
Write
Min Hold
4
Write
Sweep Average
5
Calculate
–
6
Write
Overlap
7
Blank
–
Example of Use
:TRACe:ATTRibute:TRA WRITe
:TRACe:ATTRibute:TRA MAX
:TRACe:ATTRibute:TRA?
>2
:TRACe:ATTRibute:TRA CALC
:TRACe:ATTRibute:TRA?
>5