Anritsu MS9740A - Mmemory:copy:sysinfo; Mmemory:copy:xml

Chapter 3 Message Details
3-216
:MMEMory:COPY:SYSinfo
Function
This command copies the system information file from drives E to Z to
drive D.
If the specified device or file cannot be found and an error is generated,
the standard event status execution error bit becomes 1.
The copy source system information file should be moved to the following
folder of the specified drive.
x:\Anritsu Corporation\Optical Spectrum Analyzer\User Data\System Information
This message is a system management command.
Syntax
:MMEMory:COPY:SYSinfo <file_name>,<user_drive>
It is not necessary to add the extension to file_name.
Example of Use
:MMEMory:COPY:SYSinfo 'SystemInfo_20140101_010203',E
:MMEMory:COPY:XML
Function
This command copies the trace XML file from drives E to Z to drive D.
If the specified device or file cannot be found and an error is generated,
the standard event status execution error bit becomes 1.
The copy source XML file should be moved to the following folder of the
specified drive.
x:\Anritsu Corporation\Optical Spectrum Analyzer\User Data\All Trace Data
This message is a system management command.
Syntax
:MMEMory:COPY:XML <file_name>,<user_drive>
It is not necessary to add the extension to file_name.
Example of Use
:MMEMory:COPY:XML 'file001',E